Common Problems with Flat Roofs

Flat roofs are common features for many commercial buildings. If your property has flat roofing, you should be sure to talk with your roofing contractors near Redmond about some of the most common flat roof issues. While a flat roof may be prone to different maintenance issues than a sloped roof, these problems can be easily corrected with expert flat roof repair. By checking the condition of your roofing material and fixing any leaks, you can keep your flat roof in great condition throughout the years. Let’s review some of the most common problems that are associated with flat roofs.

Roof Leaks

A flat roof may be more susceptible to leaking than a conventionally sloped roof. Since flat roofs are nearly parallel to the ground, they have a natural tendency to collect rainwater and runoff. To keep your flat roof from developing leaks, you should schedule annual inspections with your local roofing contractor. Your contractor can identify weak points in your flat roof and repair them before they start to leak.

Buckled Asphalt

Many flat roofs are sealed with an asphalt membrane, which is designed to protect the roof from UV radiation and water damage. Over time, and as your building shifts and settles on its foundation, the asphalt membrane on top of your flat roof may begin to buckle. To fix buckled asphalt on your roof, you may need to schedule professional roof repair services with a local roof contractor that services your area.

Standing Water

Another common problem with flat roofs is that they are more likely to develop standing pools of water. Your flat roof may be most likely to develop pooling water after a heavy rainstorm. If these pools of water are left to sit for too long, they can damage your roofing materials and create leaks. Your roofing contractors can create a drainage system that will naturally eliminate these pools of water from the surface of your flat roof. By keeping your flat roof free from standing water, you can prevent the need for major roof repair services.

Tips for Winter

Your roof is built to endure many years of seasonable impact of varying weather degrees. However, there are general practices to regularly do in preparation for each season. Below are some general tips to consider avoiding roof damage:

Tip #1: Roof Inspection

The most proactive move you can do to prepare for harsh winter is to schedule a roof inspection with G&R Roofing. We will inspect your entire roof, including flashing areas which have strong potential for leaking. We can repair or replace your roof as needed.

Tip #2: Clear Out Your Gutters and Drains

You want to be sure to remove all debris that accumulates after strong winds and/or heavy rain

Tip #3: Tree Trimming

Be proactive and keep tree branches trimmed that could become heavy with snow and break onto your roof, causing major roof damage. Don’t let tree branches touch your roof – this causes friction and results in early wear on the shingles due to abrasion.

Tip #4: Snow Removal

Remember, ice blocks flow, so remove icicles quickly so not to prevent water flow

Continue reading

Roofing Issues & Your Roof Material Matters

Poor or Faulty Installation

Faulty roof installation will undoubtedly have consequences. Poor roofing installation will result in higher risk of costly problems as well as decreasing the product life expectancy of your roof. If your uncertain of the condition of your roofing installation, contact the roofing professionals at G&R Roofing for your free inspection.

Leaks and Moisture

Wind, rain, hail, snow, ice, and debris can lead to moisture getting under the layers of roof and causing leaks, mold, and/or rot. Get your roof inspected before storm season to circumvent moisture issues that could require full roof replacement.

Improperly Installed Flashing

Flashing is what seals the areas where your roof has been penetrated (like vent pipes, sky lights, chimneys, and heating and HVAC systems). When flashing is poorly attached, it can cause open seams and laps and ultimately allow water to enter your home. Improperly installed flashing can also reduced puncture resistance in your roof.

Unwelcome Critters

Birds, small animals and creatures, and insects can cause significant roof damage. If your DIY methods are unsuccessful, contact your local community center or your local pest control company for help on evicting critters.

Standing Water

Water that ponds or stands on your roof is a guarantee of a looming problem. Common causes range from debris buildup to improper drainage of HVAC units and gutters.

Continue reading

Ignoring Your Roof Leak Will Cost You

The cost of an ignored leaky roof is more than just financial strain. The financial repair can be expensive, but what’s more costly and impactful, are the hazards an ignored leak can pose for everyone living under the damaged roof.

Hazard to Your Health – MOLD

Mold is a type of fungus, standing water creates the bacteria that creates the mold and the cycle doesn’t stop until the mold is removed, can’t remove mold without removing the standing water created by the leak in the roof

Removing mold is expensive, so now the pocketbook gets hit hard twice – mold removal, roof repair

Mold can be a severe problem to asthma, irritant to eyes, nose, throat, and skin.

Continue reading

What Kind of Roof Damage

Whether you are a home owner, property manager, or a business owner, roof repairs are likely to occur periodically for all residential and commercial roofing. The specific type of roof material you have covering your building will be impacted differently from various types of damages.

The most common types of roof damage include:

  • Moisture and Leaks – Moisture build up and roofing leaks must be addressed. Small issues can be repaired easily and quickly, whereas ignored small issues can become major problems that require more drastic repair or replacement
  • Hail Damage – If a hail storm came through your neighborhood, it is highly likely that your roof may have some hail damage. Don’t ignore this, again structural damage will cause more likely irreparable damage
  • Pest Damage – Birds, squirrels, racoons, etc., the creatures of nature will impact your roofing material when they attempt to make your roof their home and/or their normal stomping ground via passing transport over time.
  • Roofing Material Failure – Improper installation of roof flashing will cause structural damage. Roof repair will be required and occasionally, a new installation may be strongly advised.

Regardless of the roofing damage you may have fallen victim to, contact G&R Roofing for our certified and professional technicians. We will have you fully covered from the elements in no time. Our roofing repairs The Woodlands, roof maintenance Dallas, and roofing installation San Antonio TX are all guaranteed to surpass your expectations.

Top Questions on Attic Ventilation

If you are replacing your attic ventilation or having a new roof installation done as part of your custom home build, then don’t neglect the importance of attic ventilation. Although all components serve their purpose, and often connect to other parts, attic ventilation has a way to being connected to some of your higher priority details as the consumer, energy consumption, cost, and even carbon footprint. Today we discuss the top five questions regarding the topic of attic ventilation.

The answers to the main questions that homeowners may have are common knowledge for all experienced professionals in attic ventilation.

Why Does It Matter?

Mother nature impacts your roof year-round, regardless of your location. Attic ventilation offers the benefits of withstanding heat buildup in the hot summer months, buildup of moisture in the cold winter months, and ice dams in the temperatures equating to snow and ice.

Seem insignificant or too basic? Well, attic ventilation helps extend the lifetime of your roofing materials like shingles. Attic ventilation is a top contributor to lower electricity bills, reduced load factor on your major appliances like your ac unit, fans, and refrigerators. Surely, you feel that impact in the heat of summer, and maybe it seems less apparent or even less impactful in the cold winter months. However, the truth is the significance of attic ventilation may be more important in colder conditions.

An average family unit of four persons generates an estimate two to four gallons of water vapor every single day by showering, cleaning, breathing, etc. Inevitably, some of the water vapor rises into the attic. In winter, the amount of water vapor that the air can hold is lower than in summer; resulting in condensation as frost or water droplets, dripping into the insulation, and in time, contribute to mold, mildew, wood rot and poor indoor air quality.

Continue reading